Well, the kitchen’s got some wood. After doing the countertops, the next project to be done was the backsplash and tiled wall. It was a horrible tan floor tile and was long over due to be ripped down. The tiles came of relatively easily, but a few spots ripped up the drywall behind. leaving it patchy and large areas of thinset still on the wall. They weren’t in horrible shape, but not good either. To get the walls to the point of taking a new tile evenly would definitely be a project in itself.
Originally, I had planned on doing all subway tiles for the backsplash with a dark grout. Classic and clean, much like the kitchens below, which had always been the inspiration for mine, with the dark lower cabinets and the concrete countertop.
Since my concrete counters didn’t quiiiiiiiite turn out looking like these, and the whole kitchen was starting to feel a little industrial, which is not really the best fit for a cabin in the woods. The combo of the condition of the walls, and the industrial vibe made me think I needed to go a different direction, which is where the wood idea came in. I figured it would warm things up a bit and it would be easy to install. After some googling for inspiration, I found a few options that I thought would look good.
My initial thought was salvaged wood. I figured it would be cheap, a bit grayed out to go with the rest of the kitchen, and I liked the varying lengths and widths. The trouble was, where to find all this. I know in upstate NY, there’s a ton of places to get old wood, but the trouble is taking the time to find and clean up enough of it to do the whole backsplash and wall, in total, about 40 sq feet. There’s actually a company called Excelsior just down the road from the Hill House that specializes in reclaimed wood, so I figured this would be perfect. They’re only open monday-friday, which is a bit of a bummer for a weekender, but it just happened to work out that I had a monday off, so I made an appointment to check out the wear house. I found tons of great options, and got an emailed quote the next day. Perhaps I’m totally naive, but I was kind of shocked at the quote I got, which was about $7.50 per square foot. It still would have been only about $300-350 to do the backsplash, but this seemed like a lot of money for what was basically trash. There are literally hundreds of falling down houses, barns, chicken coops, in the area that have tons of exactly what I needed, but again time = money, so I guess that’s why this would have cost that much. The people at Excelsior were super helpful and great to work with, but I’m too stubborn (cheap) to pay that rate for what I could have ripped off of my friends dilapidated garage.
BUT, I’m also lazy and was tired of having the kitchen in shambles and didn’t want to wait until I could source all this shit, so it was time to consider other approaches. I had read on other blogs that people did horizontal paneling, or floors with ripped down sheets of plywood just face nailed to the surface, and thought that this could look okay, it would be much more basic looking but would be easy to install and would add some textural interest at least. A quick trip to Home Depot later, I had my solution, but it wasn’t quite what I was expecting. In their lumber aisle, I found some really nice pieces of cedar. This cedar wasn’t red like most I had seen before and they all had a really nice grain pattern. They were less than $6 per 8′ 4″x2″ board, which meant it would be less than $90 to do the whole kitchen. I figured that even if I dint end up liking it, I could always paint it white like I had planned, or I could stain it darker or a different brown.
I borrowed a friend’s nail gun (best invention ever!) and used a circular saw to cut the boards into random lengths for a staggered pattern. They all look a bit rough and rustic, with holes from the finishing nails and some gaps where the boards or wall weren’t quite straight, but I don’t mind, it’s a little more like the reclaimed look than a polished finish. They totally give the kitchen a warmer feeling and add a bit of an organic element back in so it’s not industrial feeling. They even some how make the concrete counters look much better to the point where I’m not ready to rip them out and put in some kind of expensive marble. YAY!
For now, the wood is unfinished and I really like the color and matte finish on it. It being a kitchen and messes happening, I’ll probably need to put some kind of finish or sealant on it for protection, but I don’t want the wood turning reddish or going yellow like with a poly. So for now, here’s my naked wood.